OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
NOT FULLY MISSION
An indication of rear cab mount failure is evidence of wear or rubbing on
side door above driver-side or passenger-side blast deflector.
Inspect rear cab mounts for evidence of
deterioration, overcompression, or loose
mounting hardware. Notify your super-
visor of any damage or looseness found.
Inspect wheel lug nuts and wheel rim Two or more studs or nuts are missing
bolts/nuts for looseness (e.g., polished from the same wheel.
surface, rust, or minor cracks around
bolt and wheel mating surfaces). Notify
your supervisor of any looseness found.
Check all armor kit mounting hardware
for loose or missing hardware. Notify
your supervisor of any loose or missing
mounting hardware found.
a. Check that escape hatch is centered in Escape hatch will not latch closed.
roof opening and securely latched
closed. Ensure there is no damage to
latches and latch mounting hardware.
b. Inspect for damage to escape hatch
seal. Notify your supervisor of any
Check both door assembly seals, hard-
ware, and stop strap for damaged or
loose components. Notify your supervi-
sor of any damage found.
Check center blast deflector for evi-
dence of contact with steering compo-
nents. Notify your supervisor of any
contact points found.
END OF WORK PACKAGE