Quantcast REMOVAL - TB-9-2320-279-13-P-20060

 

Click here to make tpub.com your Home Page

Page Title: REMOVAL
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
DOOR LATCH AND LOCK PIN REPLACEMENT - TB-9-2320-279-13-P-20059
Up
TB-9-2320-279-13-P-2 Concrete Protection Kit for M977 Series Heavy Expanded Mobility Tactical Trucks (HEMTT) Manual
Next
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - TB-9-2320-279-13-P-20061
TB 9-2320-279-13&P-2
DOOR LATCH AND LOCK PIN REPLACEMENT - CONTINUED
0013 00
REMOVAL
1.
Open door assembly.
2.
Disconnect spring (1) from link rod (15).
3.
Remove locknut (4), bolt (2), and washer (3) from door latch (5). Discard locknut.
4.
Remove three locknuts (8), washers (9), bolts (6), washers (7), and door latch (5). Discard locknuts.
5.
Remove three locknuts (14), washers (13), bolts (11), washers (12) and latch bracket (10) from door. Discard locknuts.
6.
Remove two locknuts (22), washers (21), bolts (19), washers (20) and bracket (23) from door. Discard locknuts.
7.
Remove lock pin (16) from brackets (17 and 18).
8.
Remove four locknuts (22), washers (21), bolts (19), washers (20) and brackets (17 and 18). Discard locknuts.
2,3
4
1
1
5
23
6,7
19,20,21,22
18
17
8,9
16
15
10
11,12
13,14
417-031
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install brackets (17 and 18), four washers (20), bolts (19), washers (21), and new locknuts (22) on door.
2.
Install lock pin (16) in brackets (17 and 18).
3.
Install bracket (23), two washers (20), bolts (19), washers (21), and new locknuts (22) on door. Install latch bracket (10),
three washers (12), bolts (11), washers (13), and new locknuts (14) on door.
4.
Install door latch (5) with three washers (7), bolts (6), washers (9), and new locknuts (8).
5.
Position link rod (15) and install washer (3), bolt (2), and new locknut (4) on door latch (5).
6.
Connect spring (1) to link rod (15).
7.
Operate door handle and lock pin to verify correct operation (WP 0004 00).
END OF WORK PACKAGE
0013 00-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +