Quantcast INSTALLATION - TB-9-2320-279-13-P-20114

 

Click here to make tpub.com your Home Page

Page Title: INSTALLATION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
CLEANING AND INSPECTION - TB-9-2320-279-13-P-20113
Up
TB-9-2320-279-13-P-2 Concrete Protection Kit for M977 Series Heavy Expanded Mobility Tactical Trucks (HEMTT) Manual
Next
INSTALLATION - CONTINUED - TB-9-2320-279-13-P-20115
TB 9-2320-279-13&P-2
ROOF ARMOR REPLACEMENT - CONTINUED
0024 00
INSTALLATION - CONTINUED
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause lung irritation.
Contact with skin can cause dermatitis. Wear gloves and safety goggles and use product in a well-ventilated
area away from open flame. If ingested, keep individual calm and seek medical attention. DO NOT induce
vomiting. If contact with skin or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW
local policy and ordinances. Failure to follow this warning may cause injury to personnel.
9.
Apply thread adhesive to two bolts (10). Install two spacers (11) and bolts (10) in opposite corners of escape hatch open-
ing.
10.
Apply thread adhesive to 10 bolts (7). Install 10 new lockwashers (8), washers (9), and bolts (7) on right side of roof
armor (6).
11.
Remove two loosely installed locknuts (15) from left-rear stud plate (22).
12.
Install four washers (18) and bolts (19) through left-rear cab wall.
13.
Install spacer plate (21) on four bolts (19).
14.
Position left-rear roof armor bracket (20) on left-rear stud plate (22) and on four bolts (19).
15.
Install four washers (16) and new locknuts (15) on left-rear stud plate (22). Hand tighten locknuts.
16.
Install four washers (18) and new locknuts (17) on bolts (19) coming through left-rear cab wall. Hand tighten locknuts.
17.
Remove two loosely installed locknuts (2) from left-front stud plate (1).
18.
Install left-front roof armor bracket (4) on left-front stud plate (1).
19.
Install six washers (3) and new locknuts (2) on left-front stud plate (1). Hand tighten locknuts.
20.
Apply thread adhesive to five bolts (5). Tighten bolts to underside of front roof armor bracket (4).
21.
Tighten six locknuts (2) on left-front roof armor bracket (4) to 35 lb-ft (47 Nm).
22.
Tighten eight locknuts (15 and 17) on left-rear roof armor bracket (20) to 35 lb-ft (47 Nm).
23.
Tighten 12 remaining roof armor bolts (7 and 10) to 18 lb-ft (24 Nm).
4
6
5 (HIDDEN)
7,8,9
2,3
1
(HIDDEN)
24,25,26,27
23
10,11
22
(HIDDEN)
13,14
417-044
15,16
12 (HIDDEN)
20,21
17,18,19
0024 00-4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +