Figure 42. Re-install the Tire Carrier.

II106700-5

Rev. B

d. Re-install the Tire Carrier and Spare Tire.

1. Position the Tire Carrier (see Item 1 in Figure 42) on the fender (2).

2. Install two screws (3), two lockwashers (4), and two nuts (5).

3. Install two screws (6), two lockwashers (7), and two nuts (8) on the tire carrier (1)

and the fender (2) as shown.

4. Torque the screws (3) to 80 ft-lb.

Figure 42. Re-install the Tire Carrier.

5. Torque the screws (6) to 80 ft-lb.

6. Stow the Spare Tire (Per TM 9-2320-279-10).

5.1.10 Install the Roof Armor, Kit P/N 106704-3.

NOTE

Install the Front and Rear Studplates (P/N 106780-1 / -2) through the slots in the

Roof Armor and then loosely install them using locknuts (3/8 16) before lifting the

Roof Armor Panel onto the roof of the HEMTT (See Figures 43 and 44).

0039 00-80