DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Keep clear of heavy parts supported only by lifting device. Failure to follow this warning may cause
injury or death to personnel.
For proper threat protection, door ballistic glass must be correctly installed into door frame. During
installation, ensure that stencil marking "THIS SURFACE TOWARDS THREAT" is located on outside
of cab. Improperly installed door ballistic glass will not protect occupants. Failure to follow this warn-
ing may cause injury or death to personnel.
Door ballistic glass weighs 75 lb (34 kg).
With assistance, install door ballistic glass (1) by sliding into end of channel (7).
It may be necessary to cut bracket (8) approximately 0.5 in. (1.3 cm) to allow handle to rotate.