Quantcast CLEANING AND INSPECTION - TB-9-2320-364-13-P-20078

 

Click here to make tpub.com your Home Page

Page Title: CLEANING AND INSPECTION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
REMOVAL - CONTINUED - TB-9-2320-364-13-P-20077
Up
TB-9-2320-364-13-P-2 Crew Protection Kit for Truck Tractor M1074/M1075 Palletized Load System (PLS) Manual
Next
INSTALLATION - TB-9-2320-364-13-P-20079
TB 9-2320-364-13&P-2
WINDSHIELD BALLISTIC GLASS REPLACEMENT - CONTINUED
0017 00
CLEANING AND INSPECTION
1.
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
2.
Ensure all existing sealant is removed from windshield ballistic glass frame (20).
INSTALLATION
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause lung irritation.
Contact with skin can cause dermatitis. Wear gloves and safety goggles and use product in a well-ventilated
area away from open flame. If ingested, keep individual calm and seek medical attention. DO NOT induce
vomiting. If contact with skin or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW
local policy and ordinances. Failure to follow this warning may cause injury to personnel.
1.
Apply sealant to outside opening of windshield ballistic glass frame (20).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Failure to follow this warning may cause injury or death to personnel.
For proper threat protection, windshield ballistic glass must be correctly installed onto windshield bal-
listic glass frame. During installation, ensure that decal "INSTALL THIS SURFACE TOWARDS
THREAT" is located on outside of cab. Improperly installed windshield ballistic glass will not protect
occupants. Failure to follow this warning may cause injury or death to personnel.
NOTE
Windshield ballistic glass weighs 114 lb (52 kg).
2.
With assistance, position windshield ballistic glass (19) in lower windshield ballistic glass bracket (18), with "INSTALL
THIS SURFACE TOWARDS THREAT" decal facing outside of cab.
3.
Install top windshield ballistic glass bracket (10) on windshield ballistic glass (19) with six washers (9) and new lock-
nuts (8). DO NOT fully tighten locknuts.
4.
Install two side windshield ballistic glass brackets (7) on windshield ballistic glass frame (19) with 10 washers (16), and
new locknuts (15).
0017 00-4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +