CAB SIDE (FRONT) ARMOR AND SIDE MARKER REPLACEMENT - CONTINUED
ASSEMBLY - CONTINUED
Lower marker light show. Upper marker light is identical.
Install side marker gasket (8), side marker (9), four bolts (5), washers (10), and new locknuts (11).
Install side marker cover (12) and two screws (13) on side marker (9).
If removed, use sealing compound and attach four spacers (4) to side of cab.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury to personnel.
Side armor assembly weighs 49 lb (22 kg).
With assistance, position side armor assembly (9) and install four washers (2) and bolts (1) on side of cab.
Connect two side marker (9) wires to cab wire harness.
Ensure spacers are aligned with four bolt (1) holes.
Install four washers (2) and bolts (1) on cab side armor assembly (3).
Install nine washers (7) and bolts (6) on cab side armor assembly (3).