Figure 36. Rear Armor Panels.

II113300-1-103

Rev. A

h) Raise the panel as done previously, and carefully lower it down through the small

opening behind the cab.

Line up the holes on the side panel and temporarily fasten it in place using two

0.375-16 X 1.500-in.-long bolts. Again, this side will be securely fastened in place during

the installation of the roof armor kit.

NOTE

Do not drill holes or attach the C4ISR covers if the C4ISR equipment has

been installed on the vehicle.

Figure 36. Rear Armor Panels.

0037 00-65