Install Armor Kit, Underbody, PLS, P/N 113360-1-103

II113300-1-103

Rev. A

3.5.7 Install Armor Kit, Underbody, PLS, P/N 113360-1-103

a) Using a lifting device, position the Center Mineblast Panel (P/N 113363-1-103) into its

installed location (see Figure 56). Route the Glad Hands line and Electrical Connector

through the opening in the Center Mineblast Panel (see Figure 57).

b) Insert the Spacers (P/N 113369-1-103) between the Center Mineblast Panel and Truck

Frame Cross Member and install the hardware shown in Figure 56.

c) Attach the Center Mounting Plate (P/N 113367-1-103) to the Center Mineblast Panel

using five (5) 0.500-13 x 1.750-in.-long bolts, as shown in Figure 56 and Figure 58.

d) Install the remaining hardware, as shown in Figure 56.

e) Remove the lifting device and re-install the Glad Hands, Electrical Connector, Torque

Rod, and Steering Link that were previously removed (see Figure 59).

0037 00-87