MAINTENANCE ALLOCATION CHART (MAC) INTRODUCTION - CONTINUED
EXPLANATION OF COLUMNS IN THE MAC, TABLE 1 - CONTINUED
N OT E
The "L" maintenance level is not included in column (4) of the MAC. Functions at this level of maintenance
are identified by a work time figure in the "H" column of column (4), and an associated reference code is
used in the Remarks Code, column (6). This code is keyed to Table 3, and the SRA complete repair applica-
tion is explained there.
Column (5) - Tools and Equipment Reference Code. Column (5) specifies, by code, common tool sets (not individual
tools), common Test, Measurement, and Diagnostic Equipment (TMDE), special tools, special TMDE, and special sup-
port equipment required to perform the designated function. Codes are keyed to Table 2, the tools and test equipment
Column (6) - Remarks Code. When applicable, this column contains a letter code, in alphabetical order, which is
keyed to the remarks in Table 3.
EXPLANATION OF COLUMNS IN THE TOOLS AND TEST EQUIPMENT REQUIREMENTS, TABLE 2
Column (1) - Tool or Test Equipment Reference Code. The tool and test equipment reference code correlates with a
code used in column (5) of the MAC.
Column (2) - Maintenance Level. The lowest level of maintenance authorized to use the tool or test equipment.
Column (3) - Nomenclature. Name or identification of the tool or test equipment.
Column (4) - National Stock Number (NSN). The NSN of the tool or test equipment.
Column (5) - Tool Number (CAGEC). The manufacturer's part number, model number, or type number and Commer-
cial and Governmental Entity Code (CAGEC).
EXPLANATION OF COLUMNS IN THE REMARKS, TABLE 3
Column (1) - Remarks Code. The code recorded in column (6) of the MAC.
Column (2) - Remarks. Information pertinent to the maintenance function being performed as indicated in the MAC.
END OF WORK PACKAGE
0031 00-3/(0031 00-4 Blank)