OPERATION - Continued
Ensure BAP hold down locks in engaged (in position). Failure to comply may result in damage
Push in each of two BAP hold-down locks (Figure 4, Item 8).
SHOWN WITHOUT BAP INSTALLED
Position BAP Hold Down Locks.
· Air pressure must be sufficient in trailer air system to retract trailer locks, or damage to
trailer locks can occur while attempting to remove the BAP from trailer. If air pressure is
not sufficient, use vehicle to charge trailer air system using trailer air-charging hose. If air
system cannot retract trailer locks, use manual trailer lock retract procedure Refer to TM
9-2330-385-10. Failure to comply may result in damage to equipment.
· Ensure both trailer locks are fully retracted. Failure to comply may result in damage to
Push knob (Figure 5, Item 9) on trailer to retract both trailer locks (Figure 5, Item 10). Ensure curb-side and
road-side lock indicator pins (Figure 5, Item 11) are fully retracted.