|
| |
TM 9-2320-364-10
2-72
Table 2-1. Operator’s Preventive Maintenance Checks
and Services (Before) - CONT.
Location
Item
No.
Interval
Item to
Check/
Service
Procedure
Not Fully Mission
Capable if:
11
Before
Controls
and
Indicators -
Cont.
(9) Place transmission range
selector switch (28) in
Neutral (N).
(10) Set parking brake (29).
NOTE
Transfer case may be hard to shift and get into gear. If this condition
exists, move truck forward slightly, apply brake and place transmission
to Neutral (N), prior to attempting to shift transfer case again.
(u) Check transfer case shift
lever (30) to be sure it will shift to
HI (HI) and LOW (LO) range.
Transfer case does
not operate in range
required for
mission.
(1) Place transmission range
selector switch (28) in
Neutral (N).
(2) Move transfer case shift
lever (30) to LOW (LO) and
then to HI (HI).
|
