Table 2-3. Operators Preventive Maintenance Checks
and Services (After) - CONT.
Not Fully Mission
Hydraulic oil may be hot and cause serious burns.
When installing breather cap, ensure that tether chain lowers into
reservoir hole, or damage to breather cap gasket will result.
While hydraulic fluid is still hot,
check steering hydraulic fluid
reservoir (1) for the proper fluid
level. If level is below the 3/4
mark in the OPERATING RANGE,
notify Unit Maintenance to
determine where fluid is leaking. If
no leaks are found, fill as required.
Check for damage, cracks and
Class III leak is
evident. Cracked or
broken reservoir is