| |
TM 9-2320-364-10
2-275
e.
Off-Loading Flatrack in Manual Mode.
(1)
Check for sufficient operating room at front and rear of truck. Check
overhead clearance and ground conditions.
(2)
Apply the service brake pedal (9) and set transmission range selector (7) to
Neutral (N).
Manual mode is used mainly in event of a failure of control
electrical system. Greater care must be exercised during
operation of MANUAL mode for correct cycle of events to
occur or damage to equipment may result.
(3)
Turn the hydraulic selector switch (2) to MAN H.A.
|