2-29. LOAD HANDLING SYSTEM (LHS) (CONT).
It may be necessary to repeat the following step several
times to clear lift-hook from hook-bar.
Move the joystick (1) to LOAD to allow top of lift-hook (10) to clear
Do not move truck forward more than 3 in. (76.2 mm) to
prevent flatrack from pulling away from stops.
Release the service brake pedal (9) and place transmission range selector
(7) in Drive (D) and move truck forward approximately 3 in. (76.2 mm).
Apply service brake pedal (9).
Move the joystick (1) to UNLOAD to disengage lift-hook (10) from
Set the transmission range selector (7) to Neutral (N) and apply the parking