|
| |
TM 9-2320-364-10
2-375
Ensure there are at least two wraps of cable on hoist drum at
all times. Serious injury or death could result if cable comes
off hoist drum while lifting load.
Do not jerk HOIST control lever or load will bounce, causing
possible damage to crane or load, and causing overload
shutdown to operate.
Do not attempt to lift more than maximum load rating as shown
on RANGE DIAGRAM. Exceeding load ratings could cause
damage to equipment.
(3)
Move the HOIST control lever (19) to UP position to lift load. Move
BOOM control lever (24) to UP position to raise load higher and bring load
closer to crane.
|
