2-43. REMOVING AND INSTALLING LIFTING FRAME FROM PLS
TRUCK IN FLATRACK MODE (CONT).
Lifting frame weighs 1,600 lbs. (725 kg). Personnel must stay
clear when installing or removing lifting frame to LHS hook arm
hook. Failure to comply may result in injury or death to
Sliders must be deployed before operating LHS in container
mode for proper LHS cycle. Failure to comply will result in
hook arm extending too far and lifting frame may contact rear of
truck. Lifting frame could become unhooked and cause injury
or death to personnel.
Lifting frame must be unloaded on a flat level surface. Failure
to comply may result in lifting frame tipping over unexpectedly
causing injury or death to personnel.
Position truck for removal of lifting frame (3).
Engine speed must be at idle before using hydraulic selector switch,
or damage to equipment may result.
Turn hydraulic selector switch (21) to AUTO.
Operate LHS in AUTO mode until lifting frame (3) stops.
REMOVED FOR CLARITY