Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
Set the hydraulic selector switch (6) to OFF.
Shut off engine (Para 2-23).
Adjust mirror (4) for driving.
Truck Self-Recovery (Winch To Rear).
Start engine (Para 2-15).
Apply parking brake (1).
Place transmission range selector (2) in Neutral (N).
Set transfer case shift lever (3) to LO (low) range.
Adjust right side mirror (4) so driver can see rear of truck.
Only trucks equipped with a SRW and a CRANE will
have electrical power selector switch.
Push WINCH/CRANE switch (5) to WINCH position.