Remove valve cap (8) from valve stem (9).
Inflator gage must clamp securely with no air leaks or the air pressure
gage reading will be inaccurate.
Trajectory area as shown applies to all wheel/tire assemblies.
Push latch handle (10) inward, while pushing air chuck assembly (4) onto
valve stem (9). Release latch handle and immediately step out of the
trajectory area. Read tire air pressure gage on inflator gage and compare to
Before inflating or deflating, stand out of the trajectory area or
personal injury or death may result.
If the tire is underinflated or overinflated, or there is obvious or
suspected damage on the tire or wheel components, the tire must be
completely deflated by removing the valve core from the valve
stem or personal injury or death may result.
Inflate/deflate tire to proper pressure (see Table 2-9).
Push in latch handle (10) and disconnect air chuck assembly (4) from valve
Install valve cap (8) on valve stem (9).