2-3. LOCATION AND USE OF CONTROLS AND INDICATORS
Figure 2-7. Transmission Range Selector Controls
Control or Indicator
Reverse for backing the truck.
Neutral, use this position when starting the
engine, parking the truck, or if the truck is left un-
attended while the engine is running with the
parking brake applied during crane operation.
Drive, use this position for all normal driving
conditions. The transmission will upshift and
downshift automatically. Transmission will
start in second gear (low range only) or first
gear (high range only).
Low gear hold, provides the greatest torque
and maximum engine braking effect.
Second gear hold, use when pulling through
mud or snow.
Restricts upshifts to no higher than 3rd gear.
Restricts upshifts to no higher than 4th gear.
DO NOT SHIFT
Indicates (lights red) the operating condition
under which shifting would cause damage to the