Table 3-1. Troubleshooting - CONT.
Test or Inspection
WINDSHIELD WASHER WILL NOT OPERATE.
Step 1. Check washer fluid level in reservoir (1).
If fluid is low, notify Unit Maintenance.
Step 2. Check if windshield wiper circuit breaker (2) is tripped.
If tripped, reset. If breaker trips again, notify Unit Maintenance.
Step 3. If washers do not operate, or if only one washer operates, check
that hoses (3) are securely connected to reservoir.
If hoses (3) are loose, connect to reservoir.
If hoses (3) are split or broken, notify Unit Maintenance.