|
| |
TM 9-2320-364-20-2
2-962
1. ENGINE FAILS TO CRANK (CONT).
18.
Replace starter
(Para 7-12).
Verify repair, go to
Step 20 of this Fault.
YES
NO
22 to 28 vdc register on 24 vdc
volt meter indicating wire 1055
between DUVAC and starter
motor is OK.
Batteries OK.
ENGINE switch OK.
Wire 1021 OK.
Wire 1871 OK.
Diode M36 OK.
Wire 231 OK.
Wire 210A OK.
Wires 208/209 OK.
NEUTRAL relay R11 OK.
Wire 1281 OK.
Wire 1021A OK.
Wire 1435 OK.
Magnetic switch R27 OK.
Wire 1139 OK.
Wire 1045 OK.
Wire 1138 OK.
Start ground wire OK.
Starter motor solenoid faulty.
Starter motor faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Voltage test.
STE/ICE-R #89.
If 22 to 28 vdc are not present at
terminal 3, starter solenoid is
faulty.
WARNING
Are 22 to 28 vdc present at
starter solenoid, terminal 3
with ENGINE switch held in
the START position?
Read WARNING
on Page 2-963
|
