| |
TM 9-2320-364-20-2
2-1089
(1) Start engine (TM 9-2320-364-10) and
allow to warm up.
(2) Observe water temperature gage
reading.
(a) If water temperature is below
230F (110C), fault has been
corrected. Perform Steps (3)
and (4) below.
(b) If water temperature is over 230F
(110C), fault not corrected.
Perform Steps (3) and (4) below
and notify DS Maintenance.
(3) Turn OFF ENGINE switch.
(4) Install right side noise panel
(Para 17-26).
VERIFY REPAIR
|