(1) Disconnect wire 1435 from
(2) Set multimeter select switch to ohms.
(3) Is there continuity between beacon
light connector wire 1435 and a
known good ground?
(a) If there is no continuity, repair
wire 1435 (see schematic
Fig 2-30) or notify DS
(b) If there is continuity, replace
beacon light (TM 9-2320-364-10).
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.