(1) Turn ON ENGINE switch
(2) Turn on headlight switch.
(3) Set dimmer switch to high beam.
(4) Inspect both headlights for operation.
(a) If both headlights fail to operate,
fault is between dimmer switch
and headlights. Perform Steps (5)
and (6) below and go to Step 4 of
(b) If one headlight operates, fault is
between faulty headlight lamp
and wire 1007 first splice.
Perform Steps (5) and (6) below
and go to Step 2 of this Fault.
(5) Turn off headlight switch.
(6) Turn OFF ENGINE switch.
The blue high beam light in the instrument
panel indicates high beam lights are turned on