(1) Set multimeter select switch to ohms.
(2) Is there continuity on wire 234
between connector MC12, terminal 14
and a known good ground?
(a) If there is no continuity, repair
wire 234 (see schematic Fig 2-20)
or notify DS Maintenance.
(b) If there is continuity, wire 234
is OK. Replace ATEC shift
selector (Para 8-2).
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.