|
| |
TM 9-2320-364-20-2
2-1575
(1) Install instrument panel (Para 7-13).
(2) Bleed air system pressure until green
and red needles in gage are below 60
psi (414 kPa) (TM 9-2320-364-10).
(3) Turn ON ENGINE switch.
(a) If LOW AIR/HYDRAULIC OIL
alarm does not operate, fault not
corrected. Turn OFF ENGINE
switch and notify DS
Maintenance.
(b) If LOW AIR/HYDRAULIC OIL
alarm does operate, fault
corrected.
(4) Turn OFF ENGINE switch.
VERIFY REPAIR
NOTE
Do not perform Step (2) below if air pressure
gage indicates less than 60 psi (414 kPa).
|
