(1) Remove bolt, lockwasher and wires
1275, 1435 and 1815 from alternator.
(2) Set multimeter select switch to ohms.
(3) Is there continuity measured on wire
1275 and a known good ground?
(a) If there is no continuity, repair wire
1275 (see schematic Fig 2-40) or
notify DS Maintenance.
(b) If there is continuity, wire 1275 is
(4) Install wires 1275, 1815, and 1435
on alternator with lockwasher and bolt.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
Tag and mark wires before removal.