(1) Set multimeter select switch to volts
(2) Connect positive (+) multimeter lead to
the energize terminal of the voltage
(3) Connect negative () multimeter lead
to known good ground.
(4) Start engine (TM 9-2320-364-10).
(a) If at least 24 vdc are not present,
turn off engine and go to Step 9
of this Fault.
(b) If at least 24 vdc are present, turn
off engine and go to Step 11 of
(5) Turn OFF ENGINE switch.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
Alternator is capable of producing over 40 vdc. Be careful when taking a voltage reading not to get shocked.
STEERING WHEEL SHOWN