(1) Is there continuity on wire 1932
between harness connector MC128,
terminal B and harness connector
MC61, terminal B?
(a) If there is no continuity, repair wire
1932 (see schematic Fig 2-67) or
notify DS Maintenance. Perform
Steps (2) and (3) below.
(b) If there is continuity, perform Step
(2) and (3) below and go to Step 6
of this fault.
(2) Connect connector MC128 to
(3) Connect connector MC61 to
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may result.