| |
TM 9-2320-364-20-3
2-2099
(1) Remove inflate valve from front
manifold (Para 13-10).
(2) Inspect valve assembly for a broken
spring, damaged diaphragm, sticking or
any other physical damage.
(a) If inflate valve is damaged, repair
or replace inflate valve (Para
13-10).
(b) If inflate valve is not damaged,
fault is not corrected. Notify
Supervisor.
(3) Install inflate valve.
(4) Connect inflate valve harness
connector and tighten screw.
(5) Install front CTIS manifold cover (Para
13-8).
(6) Close front access cover
(TM 9-2320-364-10).
VISUAL INSPECTION
|