| |
TM 9-2320-364-20-3
2-2155
(1) Remove inflate valve from rear
manifold (Para 13-10).
(2) Inspect valve assembly for a broken
spring, damaged diaphragm, sticking,
or any other physical damage.
(a) If inflate valve is damaged, repair
or replace inflate valve
(Para 13-10).
(b) If inflate valve is not damaged,
fault is not corrected. Notify
supervisor.
(3) Install inflate valve.
(4) Connect inflate valve harness
connector and tighten screw.
(5) Install rear manifold cover.
(6) Put LHS in transit position
(TM 9-2320-364-10).
VISUAL INSPECTION
|