|
| |
TM 9-2320-364-20-3
2-2163
(1) Remove four nuts and wheel cover.
(2) Start engine (TM 9-2320-364-10).
(3) Set CTIS controller to HIGHWAY.
(4) Press CTIS START button.
(5) Check for air pressure in hub to wheel
valve air lines by cracking open fittings
at wheel valve.
(a) If air is escaping, turn OFF ENGINE
switch and repair or replace wheel
valve (Para 13-11).
(b) If no air is escaping, wheel valve is
OK.
(6) Turn OFF ENGINE switch.
AUDIBLE INSPECTION
Wear safety goggles when performing leakage tests on valves. Failure to do so may result in serious
eye injury due to high pressure air.
Exercise extreme caution when working around wheels or under truck while engine is operating.
Movement of truck may cause injury or death to personnel.
|
