| |
TM 9-2320-364-20-3
2-2256
Repair wire 1435
(see schematic
Fig 2-52) or notify
DS Maintenance.
Verify repair, go to
Step 12 of this Fault.
1. LHS LIGHT DOES NOT OPERATE (CONT).
LHS lamp OK.
Wire 1755 OK.
Wire 1435 from LHS control
to ground OK.
Wire 1488 OK.
LHS control assy OK.
Hydraulic selector switch OK.
Wire 1483 OK.
LHS control assy OK.
Wire 1722 OK.
Wire 1435 OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Verify repair.
If LHS lamp operates, fault has
been corrected.
YES
NO
Fault not corrected.
Notify DS
Maintenance.
12.
Does LHS lamp operate?
Fault corrected.
11.
YES
NO
LHS lamp OK.
Wire 1755 OK.
Wire 1435 from LHS control
assy to ground OK.
Wire 1488 OK.
LHS control assy OK.
Hydraulic selector switch OK.
Wire 1483 OK.
LHS control assy OK.
Wire 1722 OK.
Wire 1435 faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If wire 1435 is loose or faulty,
LHS lamp will not be grounded.
Is continuity measured on
LHS lamp connector wire
1435 and chassis ground?
WARNING
Read WARNING
on Page 2-2257
|