| |
TM 9-2320-364-20-3
2-2262
2. LHS NO TRANS LIGHT DOES NOT OPERATE (CONT).
3.
Is clearance between
proximity switch and hook
arm .11 in. to .13 in. (2.79 to
3.30 mm)?
Adjust proximity
switch (hook arm
down) (Para 7-37).
Verify repair, go to
Step 12 of this Fault.
YES
NO
LHS NO TRANS lamp OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Proximity switch clearance test.
If there is too much clearance
between proximity switch and
hook arm, switch will not close
to input 22 to 28 vdc to LHS NO
TRANS lamp.
WARNING
Proximity switch out of
adjustment.
Wire 1472 faulty.
Wire 1435 from proximity switch
faulty.
Wire 1471 faulty.
Proximity switch faulty.
LHS control assy faulty.
Wire 1725 faulty.
Wire 1435 faulty.
Read WARNING
on Page 2-2263
|