| |
TM 9-2320-364-20-3
2-2269
(1)
Set multimeter select switch to ohms.
(2)
Is there continuity between harness
connector MC88, terminal C and a
known good ground?
(a) If there is no continuity, repair wire
1435 (see schematic Fig 2-52) or
notify DS Maintenance.
(b) If there is continuity, wire 1435
is OK.
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|