| |
TM 9-2320-364-20-3
2-2355
(1) Loosen screw and disconnect free
flow solenoid valve harness
connector.
(2) Set multimeter select switch to ohms.
(3) Is there continuity between free flow
solenoid valve harness connector,
terminal 1 and a known good ground?
(a) If there is no continuity, go to Step
9 of this Fault.
(b) If there is continuity, notify DS
Maintenance.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
CONTINUITY TEST
|