TM 9-2320-364-20-3 2-2358 . 8.  LHS DOES NOT OPERATE (CONT). SRW operates. Crane operates. LHS light operates. LHS hoses OK. Hydraulic selector switch OK. LHS control assembly OK. Wire 1462 OK. Wire 1435 from free flow   solenoid valve OK. LHS control assembly OK. Wire 1734 OK. Wire 1435 from LHS supply   solenoid valve faulty. LHS supply solenoid valve   faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Continuity test. STE/ICE-R #91. If wire 1435 is loose or faulty, LHS supply solenoid valve will not be grounded. YES NO Repair wire 1435 (see schematic Fig 2-52) or notify DS Maintenance. Verify repair, go to Step 12 of this Fault. 11. Is continuity measured on wire 1435 at LHS supply solenoid valve harness connector, terminal 1 and chassis ground? LHS supply solenoid valve is faulty.  Notify DS Maintenance. 10. YES NO SRW operates. Crane operates. LHS light operates. LHS hoses OK. Hydraulic selector switch OK. LHS control assembly OK. Wire 1462 OK. Wire 1435 from free flow   solenoid valve OK. LHS control assembly OK. Wire 1734 faulty. Wire 1435 from LHS supply   solenoid valve faulty. LHS supply solenoid valve   faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Voltage test. STE/ICE-R #89. If wire 1734 is loose, faulty, or shorted to ground, 22 to 28 vdc will not be present at LHS supply solenoid valve. Are 22 to 28 vdc meas- ured on wire 1734 at LHS supply solenoid valve harness connector, terminal 2 with ENGINE switch ON and hydraulic selector switch in MAN HA position? WARNING WARNING Repair wire 1734 (see schematic Fig 2-52). Verify repair, go to Step 12 of this Fault. Read   WARNING on Page 2-2359 Read   WARNING on Page 2-2359