| |
TM 9-2320-364-20-3
2-2381
(1) Start engine (TM 9-2320-364-10).
(2) Set hydraulic selector switch in MAN
HA position.
(3) Hold joystick in UNLOAD position.
(a) If hook arm does not unload, fault
not corrected. Perform Steps (4)
through (6) below and notify DS
Maintenance.
(b) If hook arm unloads, fault has
been corrected.
(4) Release joystick.
(5) Set hydraulic selector switch to OFF
position.
(6) Turn OFF ENGINE switch.
VERIFY REPAIR
Keep clear of equipment when equipment is being raised or lowered. Equipment may fall and cause
serious injury or death to personnel.
|