Inspect LHS hydraulic hoses 2881,
2882, 2891 and 2892 for damage,
crimps or leaks.
(1) If hoses are damaged, crimped or
leaking; tighten fittings or replace
hoses (Para 20-3 and schematic
(2) If there are no leaks, crimps and
damage; hoses and fittings are
High pressure hydraulics [oil under 3,700 psi (25,512 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.