| |
TM 9-2320-364-20-3
2-2385
(1) Inspect two compression frame LHS
hydraulic tubes for damage, crimps or
leaks.
(2) Inspect four middle frame LHS
hydraulic tubes for damage, crimps or
leaks.
(a) If tubes are leaking, tighten
fittings.
(b) If tubes are damaged, notify DS
Maintenance.
(c) IF there are no leaks, crimps
or damage, tubes and fittings
are OK.
VISUAL INSPECTION
High pressure hydraulics [oil under 3,700 psi (25,512 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|