| |
TM 9-2320-364-20-3
2-2401
(1) Turn ON ENGINE switch.
(2) Start engine.
(3) Set hydraulic selector switch in MAN
HA position.
(4) Hold joystick in LOAD position.
(a) If hook arm does not load, fault
not corrected. Perform Steps (5)
through (7) below and notify DS
Maintenance.
(b) If hook arm loads, fault has been
corrected.
(5) Release joystick.
(6) Set hydraulic selector switch to OFF
position.
(7) Turn OFF ENGINE switch.
VERIFY REPAIR
|