| |
TM 9-2320-364-20-3
2-2439
(1) Turn ON ENGINE switch.
(2) Start engine.
(3) Set hydraulic selector switch in MAN
MF position.
(4) Hold joystick in LOAD position.
(a) If middle frame does not load,
fault not corrected. Perform
Steps (5) through (7) below and
notify DS Maintenance.
(b) If middle frame loads, fault has
been corrected.
(5) Release joystick.
(6) Set hydraulic selector switch to OFF
position.
(7) Turn OFF ENGINE switch.
VERIFY REPAIR
|