| |
TM 9-2320-364-20-3
2-2505
86
85
30
87
(1) Set multimeter select switch to OHMS.
(2) Is there continuity between wire 1435
relay R35 terminal 85 and a known
good ground?
(a) If there is no continuity, repair wire
1435 (see schematic Fig 2-56)
or notify DS Maintenance.
(b) If there is continuity, go to Step 17 of
this Fault.
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
RELAY R35
TERMINAL 85
WIRE
1435
|