|
| |
TM 9-2320-364-20-3
2-2508
18.
Fault not corrected,
notify DS Mainte-
nance.
YES
NO
No mission module hooked up
to interface quick disconnect.
LED #2 lamp is ON.
Wire 1790 from LED #2 lamp to
connector MC135 terminal D
OK.
Wire 1790 from connector
MC135 terminal D to connector
MC133 terminal 1 OK.
Wire 1435 between connector
MC133 terminal 2 and connec-
tor MC135 terminal E OK.
Wire 1435 between connector
MC135 terminal E and LED #2
lamp OK.
LED #2 lamp OK.
Wire 1790 between LED #2
lamp and relay R35 terminal
87 OK.
Relay R35 OK.
Wire 1734 between relay R35
terminal 30 and resistor OK.
Resistor OK.
Wire 1734 between resistor and
rectifier terminal AC OK.
Wire 1734 between resistor and
connector MC135 terminal B
OK.
Wire 1734 between connector
MC135 terminal B and
connector MC132 terminal 1
OK.
Wire 1435 between connector
MC132 terminal 2 and
connector MC135 terminal C
OK.
Wire 1435 between connector
MC135 terminal C and LED #2
lamp OK.
Wire 1435 between LED #2
lamp and relay R35 terminal
85 OK.
Wire 1734 between relay R35
terminal 86 and resistor OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Verify repair.
If LHS operates, fault has been
corrected.
Does LHS operate?
15 LHS INOPERATIVE WITH INTERFACE KIT INSTALLED (CONT).
Fault corrected.
|
