| |
TM 9-2320-364-20-3
2-2620
7. BOOM WILL NOT TELESCOPE OUT USING REMOTE CONTROL UNIT (CONT).
2.
Repair wire(s) 2, 8, 11
or 12 (see schematic
Fig 2-58) or notify
DS Maintenance.
Verify repair, go to
Step 9 of this Fault.
YES
NO
Telescope operates using
manual control.
At least one other remote
control function operates.
Remote control unit harness
faulty.
Controller switch faulty.
Controller circuit card faulty.
Remote control unit cable faulty.
Yellow wire from truck remote
control connector outlet to
terminal 11 faulty.
White wire from terminal 11 to
solenoid faulty.
Solenoid black wire faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If no continuity, wire between
terminals is faulty.
WARNING
Is continu-
ity meas-
ured between
terminals H, B, C, and D and wires
8, 2, 11, and 12 from remote
control unit hookup to four
terminal connector with
EMERGENCY STOP switch
turned ON?
Read WARNING
on Page 2-2621
|