|
| |
TM 9-2320-364-20-3
2-2677
(1) START engine (TM 9-2320-364-10).
(2) Set hydraulic selector switch to
CRANE/SRW position.
(3) Turn ON crane POWER switch.
(4) Release MHC MAIN HYDRAULIC
PRESSURE MANUAL OVERRIDE.
(5) Operate outriggers.
(a) If outriggers function with override
released, perform Steps (7)
through (9) below and go to Step
4 of this Fault.
(b) If outriggers do not function with
override released, perform
Steps (6) through (9) below and
go to Step 16 of this Fault.
(6) Push in MHC MAIN HYDRAULIC
PRESSURE MANUAL OVERRIDE
and rotate to lock in position.
(7) Turn OFF crane POWER switch.
(8) Set hydraulic selector switch to the
OFF position.
(9) Turn OFF ENGINE switch.
MANUAL OVERRIDE TEST
|
