| |
TM 9-2320-364-20-3
2-2679
(1) START engine (TM 9-2320-364-10).
(2) Set hydraulic selector switch to
CRANE/SRW position.
(3) Turn ON crane POWER switch.
(4) Remove wire and push MHC
SYSTEM HYDRAULIC PRESSURE
MANUAL OVERRIDE in and
hold in position.
(a) If outriggers do not operate with
override locked in position,
perform Steps (5) through (8)
below and notify DS Maintenance.
(b) If outriggers operate with override
locked in position, perform Steps
(5) through (8) below and go to
Step 5 of this Fault.
(5) Unlock and pull out MHC SYSTEM
HYDRAULIC PRESSURE MANUAL
OVERRIDE.
(6) Turn OFF crane POWER switch.
(7) Set hydraulic selector switch to the
OFF position.
(8) Turn OFF ENGINE switch.
MANUAL OVERRIDE TEST
|