(1) Connect positive (+) multimeter lead
to (+) terminal of rectifier.
(2) Connect negative () multimeter lead
to a known good ground.
(3) Turn ON ENGINE switch
(a) If 22 to 28 vdc are not
present, perform Step (4) below
and notify DS Maintenance.
(b) If 22 to 28 vdc are present,
perform Step (4) below and go to
Step 9 of this Fault.
(4) Turn OFF ENGINE switch.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.