Inspect accumulator and tube from four
bank valve to accumulator for damage,
crimps or leaks.
(1) If accumulator or tube is leaking,
tighten loose fittings or replace
tube (Para 20-3) or accumulator
(2) If no damage, crimps or leaks are
found, go to Step 3 of this Fault.
High pressure hydraulics [oil under 3,100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.